30
You will need to turn the brake pad adjustment knob counter clockwise fully allowing room for pads to
be changed. Remove the retainer spring and slide the old pads out one at a time. Use the pad arms to
push the pads out.
Insert the new pad into the caliper by first installing the adjustment knob pad (outside pad) and align
the pad backing arm with the pad backing slot. Insert the inside pad through the caliper and align the
pad backing arm with the pad backing slot. Reinsert the pad retainer spring which holds the pads in
place.
Reinstall the caliper back onto the fork or frame or wheels back on bike. Follow Chapter 7:
Maintenance and Replacement section c “Brake Adjustments” on adjusting the brake to the perfect
setting.
CAUTION:
Be sure not to adjust the adjusting barrel on the brake lever assembly for a standard cable
adjustment. It will not allow for full brake lever modulation and have a bad influence on the brake performance.
CAUTION:
Brake pad replacement – check the brake pads for wear. If the pads are at 0.5mm or less, they need to
be replaced for continued safe braking.
e.
Derailleur adjustment
If the chain of your bicycle falls off at the largest COG/sprocket or the chain is having problems remaining on the
correct gear, you may need to adjust your derailleur.
There are a multiple ways to adjust your derailleur but for a simple adjustment on the changing of gears, follow
these instructions.
Locate at the rear of the derailleur, the adjusting knob where the cable enters the derailleur. This knob
allows the loosening or tightening of the cable. Rotate this knob clockwise or counterclockwise until the
derailleur is properly changing gears. This is a quick fix but for a correct adjustment, the adjustment should
be at the cable locking plate and fixing bolt with the knob used for fine tuning.
For a more detailed adjustment of the derailleur, you should bring your bicycle to an authorized Prodeco dealer or a
neighborhood bike shop who services Shimano derailleurs.
Your derailleur also includes a Tensioning Adjustment and Stroke Adjustment. Below are Shimano’s documentation
on making these adjustments:
Содержание G Plus Mariner 7
Страница 7: ...7...
