14
© COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED.
15
© COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED.
SAFETY AND NOTICES
Important Safety Information
Read and follow these instructions to use your products and services safely.
Read and keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Keep all devices, cabling, and accessories away from children.
•
Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including
•
amplifiers) that produce heat.
Protect the power cord from being touched, walked on or pinched, particularly at plugs and at the point where
•
they exit from the apparatus.
Only use supported devices and accessories with your service.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
•
in any way, such as damage to the power-supply cord or plug, liquid has been spilled or objects have fallen
into any of the devices, a device has been outdoors / exposed to rain or moisture, does not operate normally,
or has been dropped.
Do not place naked flame sources, such as lighted candles, on or near the devices.
•
These devices do not have on/off switches. To disconnect the devices from power, you must disconnect the
•
power cord. Make sure the power cord is always easily accessible but out of reach of children.
The devices and all accessories included with this device are for indoor use only.
•
Do not move the devices if another device such as a TV, computer, or other electronic device is connected to
•
it.
Do not expose the device to dripping or splashing and do not place any object filled with liquid on or near any
•
of the devices.
Other important Information such as model number, electrical rating, and other classifications is located on the
•
bottom of the devices.
FCC Regulatory Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult your service provider, retailer, or an experienced technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your phone. Changes or modifications not expressly approved may
cause interference and void the user’s authority to operate the equipment.
Product
product name
Model
ROS 1000, ROS 2000
Responsible Party
Prodea Systems, Inc.
6101 West Plano Parkway
Suite 210
Plano, Texas 75093
Phone
214.278.1850
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the back of this equipment is a label that
contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may connect to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For product approved
after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ##
are the REN without the decimal point (e.q., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If your DIGITAL VIDEO RECORDER causes harm to the telephone network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
Содержание ROS 1000
Страница 1: ......
