ProCurve 5406zl, Руководство по установке и началу работы, Страница: 20 / 52

2-6
Installing and Connecting the External Power Supply Shelf
Installation Procedures
In
stal
lin
g and
Co
nnec
tin
g th
e Ext
ern
a
l
Po
we
r Supp
ly Sh
elf
2. Partially install a screw into the top hole of a pair of holes that are 0.5
inches apart in each rack/cabinet upright as shown in the illustration
below. Ensure that the screws are at the same level in each upright.
Figure 2-2. Mounting screw positioning
3. Place the switch in the rack and lower it so the notches in the bottom of
the bracket slide onto the screws, then tighten these screws.
Figure 2-3. Installing bracket notches on screw
Partially install a screw
into the top hole of a
close (0.5-inch) pair on
both sides of the rack