ProCurve 10ag, Руководство по установке и настройке, Страница: 44 / 132

4-6
Setting Up the Access Point
Configuring Wireless Settings
• g only: Select to allow connections from 802.11g clients only.
• a only : Select to allow connections from 802.11a clients only.
• b only: Select to allow connections from 802.11b clients only.
7. In Data Rate , select the maximum speed at which the access point can
transmit traffic for this wireless profile. If you want the access point to
automatically use the optimum data rate for the associated wireless
clients and devices, select
Best .
8. Click Apply . A confirmation message appears.
9. Click OK to finish creating the wireless profile.
N o t e
For the access point to operate using this wireless profile, the radio interface
configured for the SSID must be enabled. Check the radio status on the
Information page. If the radio is disabled, refer to
“Configuring Advanced
Settings” on page 4-25 for instructions on how to enable it.
Editing a Wireless Profile
To edit an existing wireless profile:
1. On the menu, click Wireless Settings .
2. Click the option button for the wireless profile that you want to edit. For
example, if you want to edit the
wireless-g profile, click the option button
next to it.
3. Click Edit .
4. Modify the following settings as required:
• Wireless Network Name (SSID)
• SSID Broadcast
• Channel/Frequency
• Mode
• Data Rate
5. Click Apply .
Deleting a Wireless Profile
To delete a wireless profile:
1. On the menu, click Wireless Settings under Setup . The SSID List page
appears.