ProCurve 10ag, Руководство по установке и настройке, Страница: 63 / 132

4-25
Setting Up the Access Point
Configuring Advanced Settings
N o t e
This guide assumes that you have already configured the RADIUS server(s)
to support the access point. The configuration of RADIUS server software is
beyond the scope of this guide. Refer to the documentation provided with the
RADIUS server software.
To enable remote MAC authentication:
1. On the menu, click Access Control .
2. In SSID , select the SSID to which you want to configure access.
3. In MAC Authentication , select Enable .
4. In MAC Authentication Type , select Remote .
5. Under RADIUS Server , enter the following information:
• RADIUS Server IP : The IP address of the RADIUS server on the
network.
• RADIUS Port : The port number used to communicate with the
RADIUS server.
• RADIUS Secret : The shared secret used to gain access to the
RADIUS server.
6. Click Apply to save your changes.
To disable remote MAC authentication:
1. On the menu, click Access Control .
2. In SSID , select the SSID to which you want to configure access.
3. In MAC Authentication , select Disable.
4. Click Apply to save your changes.
Configuring Advanced Settings
Advanced settings include options for enabling and disabling the wireless
radios and Wi-Fi Multimedia (WMM), and for fine tuning the access point’s
radio operation.