1.
Unplug iron. Pour 4 ounces (
1
⁄
2
cup) of ordinary tap water
into water tank opening. Plug iron into outlet.
2.
Turn the Adjustable Steam Dial to desired steam setting.
3.
Turn Temperature Control Dial to desired setting in the
steam range. Allow two minutes for the iron to reach
desired temperature.
Water:
Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water
for use in the iron.
Steam Settings
How to Steam Iron
5
4
How to Dry Iron
1.
Turn the Adjustable Steam Dial to
O
.
2.
Turn Temperature Control Dial to desired temperature.
Allow two minutes for iron to reach desired temperature.
• During first use of the iron, it may appear to smoke. This
will stop and does not indicate a defect or hazard.
• Many irons spit or sputter during the first few uses with
tap water. This happens as the steam chamber becomes
conditioned. This will stop after a few uses.
• Steam vents should be cleared before first use. Prepare
iron for steam ironing, then iron over an old cloth for a few
minutes while letting iron steam.
Please Read Before First Use
SAVE THESE INSTRUCTIONS
CONSUMER SAFETY INFORMATION
This product is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug
has one blade wider than the other. The plug will fit into an electrical
outlet only one way. This is a safety feature intended to help reduce
the risk of electrical shock. If you are unable to insert the plug into
the outlet, try reversing the plug. If the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do
not attempt to defeat the safety purpose of the polarized plug by
modifying the plug in any way.
2.
If an extension cord is absolutely necessary, a 10-ampere cord
should be used. Cords rated for less amperage may overheat.
Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
NOTE:
The Temperature Control
Dial steam setting should match
the Adjustable Steam Dial
setting. For example, if steam
ironing silk or wool, the
Adjustable Steam Dial should
be set to light steam.
Adjustable
Steam Dial
Temperature
Control Dial
Caring and Cleaning
Iron
1.
Turn Temperature Control Dial to Off. Unplug and let cool.
The iron takes longer to cool down than it does to heat up.
2.
To empty water from iron, slowly tilt pointed end of iron
down over a sink. Water will run out of water tank opening.
3.
Wrap cord loosely around iron and store iron in an upright
position. Do not store iron laying flat on soleplate.
840091500 Ev01.qxd 1/8/02 10:37 AM Page 4