Procomp BIW1A Series, Руководство пользователя

Страница: 24 / 62

BIW1A
series
~23~
How to Install DIMM Modules on Motherboard
1. The SDRAM sockets are keyed with notches and the DIMMs are keyed
with cut-outs so that they cannot be installed incorrectly. Check that the
cut-outs on the DIMM edge connector match the notches in the SDRAM
socket. In other words, before inserting the DIMM, make sure the pin1 of
the DIMM matches with the pin1 on the DIMM socket.
2. Push down the latches on each side of the SDRAM socket.
3. Install the DIMM into the socket and press it carefully but firmly down so
that it seats correctly. The latches at either side of the socket will be
levered upwards and latch on the edges of the DIMM when it is installed
correctly.
How to Remove DIMM Modules from Motherboard
1. Press the holding latches at either side of the socket outward to release the
DIMM.
2. Gently pull the DIMM out of the socket.