1 4
MAIN BURNER
Periodically inspect all burner flame
holes with the heater running. All
slotted burner flame holes should
be open with yellow flame present. All
round burner flame holes should be
o p e n w i t h a s m a l l b l u e f l a m e
present. Some burner flame holes
may become blocked by debris or
rust, with no flame present. If so,
turn heater off and let it cool. Either
remove blockage or replace burner.
Blocked burner flame holes will
c r e a t e s o o t . R e v i e w y o u r v i d e o
i n c l u d e d w i t h y o u r h e a t e r f o r
additional cleaning instructions.
CABINET
Air Passageways
Use a vacuum cleaner or
pressurized air to clean.
Exterior
Use a soft cloth dampened with a
mild soap and water mixture. Wipe
the cabinet to remove dust.
LOGS
If you remove logs for cleaning,
refer to Log Placing Instructions
(page 22) to properly replace logs.
Replace logs if broken or chipped
(dime sized or larger).
Figure 25 -Pilot Air Inlet Hole
SPECIFICATIONS
Model
SN400TYLA/SL400TYLA
Btu(Variable) 20,000/40,000BTU/H
Gas Type Propane/LP or NG
Ignition Piezo
Propane/LP: (SL400TYLA)
Manifold Pressure 8.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 14"
Minimum 11"
NG (SN400TYLA)
Manifold Pressure 3.0"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 10.5"
Minimum 5"
Dimensions, Inches (H
×
W
×
D)
Stove 31"
×
32 1/8"
×
17 3/8"
Carton 35 1/4"
×
35 1/4"
×
20 5/8"
Weight, pounds
Stove 122lbs.
Shipping 147lbs.
*For purposes of input adjustment
REPLACEMENT PARTS NOTE:
U s e o n l y o r i g i n a l r e p l a c e m e n t
parts. This will protect your warranty
coverage for parts replaced under
warranty.
PARTS UNDER WARRANTY
Contact authorized dealers of this
product. If they can't supply original
replacement part(s) call the number
on the front of this manual. when
contacting your dealer or PRO-COM,
have ready:
Your name
Your address
Model and serial numbers of
your heater
How heater was malfunctioning
type of gas used (propane/LP or
NG)
Purchase date
Usually, we will ask you to
return the defective part to the
factory.
Warranty card
Figure 24 -Injector Holder on Outlet
Burner Tube
PARTS NOT UNDER WARRANTY
Contact authorized dealers of this
product or Parts Central. If they can’t
supply original replacement part(s)
call PRO-COM’s toll-free number on
the front page.
ACCESSORIES
Purchase these heater accessories
f r o m y o u r l o c a l d e a l e r o r P a r t s
Central. This part is not currently
available from PRO-COM.
EQUIPMENT SHUTOFF VALVE
Equipment shutoff valve with 1/8" NPT
tap.
Burner
FLEX IBLE GAS HOSE
Flexible gas hose is used for con-
necting the heater to gas supply.
the flex hose must be CSA Approved.
