4
2.
Before installing
This manual explains the ways to install hardware and software, and to
utilize Viewer program.
The Prochips USB PC Camera is consisted as follows:
l
USB PC Camera
l
PC camera driver and software CD
l
User’s manual
3.
System specifications for installation
The PC specifications required for using Prochips USB PC Camera are as
follows:
Pentium MMX 200MHz and above (Pentium II CPU is recommended.)
Windows98 and above (For Windows98SE, driver patch installation is
required.)
RAM 16MB and above (32MB and above is recommended.)
Super VGA and above (16Bit and above color is recommended.)
PC with USB port
CD-ROM drive
Devices for video communications: Network card, or modem with above
33.6Kbps capacity
Prochips USB PC Camera Viewer 2.0 can run at Windows98 or
Windows2000.
References
Before installing the Prochips USB PC Camera, you need to check if USB
controller is properly installed by selecting My Computer -> Control Panel ->
System -> Device Manager consequently on Windows98 background
image. If USB controller is not properly installed, errors can occur when
USB related devices are installed. For installing USB controller, please refer
to main board manual.
2.
Before installing