Prochem APEX GTX 1.001-139.0, Руководство по эксплуатации

Страница: 16 / 172

14
Installation
Dealer Responsibility
Your distributor from whom you purchased this mobile
cleaning unit is responsible for correct installation of
this machine. The dealer is also responsible for initial
training of your operators and maintenance personnel
in proper operation and maintenance of this unit.
Vehicle Requirements
1. The unit should NOT be mounted in any motor
vehicle of less than 3/4 ton capacity.
DO NOT exceed the vehicle’s axle weight limit.
Include the console, full tanks, accessories, and
operators in calculations.
NE PAS excéder la limite de poids des essieux du
véhicule. Inclure la console, les réservoirs pleins,
les accessoires et les opérateurs au moment
d'effectuer les calculs.
2. If mounting in a trailer, make certain that trailer is
rated for the total weight of
UNIT AND TRAILER .
Electric or hydraulic brakes should be provided,
and a strict compliance with any State and Federal
vehicle laws must be maintained.
3. The vehicle tires should have a load rating above
the combined vehicle and unit weight.
4. We do not recommend using flooring materials that
absorb water. This could result in rust and
corrosion of the vehicle floor.
5. Padding under rubber floor mats should be
removed before installing this unit.
6. We highly recommend using a drip tray under
console (Part #86055040).
7. If using a trailer, console should be positioned so
that it balances properly with respect to axle. Ten
percent (10%) of the overall unit weight should be
on tongue.
Example: If loaded trailer weight is 2,000 lbs.,
tongue weight needs to be a minimum of 200 lbs.
to tow properly.
86410220 Operators Manual - Apex GTX Prochem