Chapter 10
Page 10-1
10.
Stocking of spare parts
10.1
Spare parts
Wear and hence the life-cycle of the major pump components are essentially influenced by a variety
of factors, such as:
•
Working pressure,
•
Temperature,
•
Properties and condition of the pumping medium,
•
System operating times.
We recommend stocking up the major spare parts as per table below. You will thus reduce the
MTTR values (Mean Time to Repair) (recommendation acc. to DIN 24296).
Number of same pumps per system section
Spare parts
P
-number
up to 2 pumps
from 3 pumps
up
Gear housing shaft sealing ring
1010
1
2
Bearing housing shaft sealing ring
1111
2
4
Pump casing O-ring
1088
1
2
Spindle nuts O-ring
2194
4
8
Cover O-ring
2192
1
2
Gear housing gasket
2198
1
1
Shaft seal, set of O-rings
2261
2
4
Gear ring
2249
1
2
Gear oil, 1 L
2294
1
2
(*) depending on pump model chosen (see data sheet)
Possible damage to property
•
Use only original
ViscoTwin
spare parts to avoid any adverse effects on the functionality of
your pump.
10.2
Ordering spare parts
When ordering spare parts: state
•
Pump type and
•
Pump number, please.
The necessary data are on the pump type plate.
No liability will be assumed for wrong deliveries on account of insufficient data.
Send your spare parts order to the following address, please:
Visco
Twin_002 EN
Email:
ATTENTION
Manual ViscoTwin 104-xx 3A
PR
O
CESSTEC, Inc.
| 345 E Tulare Ave, Unit E | Visalia, CA 93277 | USA
Phone: +1(559) 429-4227 | Fax +1(559) 429-4228
ATTENTION
