Parameter:
name:
Name of this connection
IP address:
IP address of S7-PLC (or S7-LAN-module or S5-LAN++)
chanel-type:
OP-, PG-, or unspecific connection (depending on which connection is free
in the HW-Config of an S7-PLC )
rack number:
Rack number of S7-PLC (usually 0)
slot number:
Slot number of CPU-assembly, usually slot 2
(for S7-400 with wide power-supply slot 3)
automatic:
If activated, the time is updated according to the interval-information in the PLC
interval:
Time-interval in which the time is automatically updated when automatic is selected
target / format:
PLC-clock:
write the time directly to the PLC (only S7-300/400)
DB S7 Date_and_Time:
time in DB in Date_and_Time-format
DB S7 LDT:
S7-1500: time in DB in LDT-format
DB S7 DTL:
S7-1x00: time in DB in DTL-format
DB binary:
time in DB, binary
Year:
word
Month:
byte [1...12]
Day:
byte [1...31]
Weekday:
byte [0...6]
Hour:
byte [0...23]
Minute:
byte [0...59]
Second:
byte [0...59]
Sommer time:
byte [0...1]
Updated:
byte [0...1]
DB ASCII:
time in DB, ASCII
Year:
4 Char
Month:
2 Char
Day:
2 Char
Hour:
2 Char
Minute:
2 Char
Second:
2 Char
Sommer time:
Byte [0...1]
Updated:
Byte [0...1]
block number:
for DB-parameter number of data-block
block offset:
for DB-parameter offset of time-information
With „save“ the entry is accepted and the entry is completed , with „close“ without saving the window closed.
In the overview you can see the defined stations:
stopping of time-connection
configuration of connection
delete of connection
show diagnosis
set time manually
Stations with a light gray background are stopped, no time is updated here:
More about this product can be found in the download area on the product page.
