Proceq ZRS 6060, Инструкция по эксплуатации

Страница: 30 / 68

Page 30
The mounting and removal of the optional illumination adapter is always the same
procedure independent on which model you choose.
Mounting and removal Removal and mounting Mounted
of front plate with of illumination adapters illumination adapter
calibration standard
The used illumination angle is always shown in the
display of the main view and this information is stored to
each measurement.
Make sure that the front plate with calibration
standard is always removed before mounting an
adapter.
Always mount the front plate with calibration
standard before storing the instrument.
There is no difference in carrying out the measurements
with or without adapters. See also chapter 8
„Measure“
as from page 24.
10.2 Handles
For reaching high positioned traffic signs or retroreflective markings on heavy and
long vehicles and their trailers, we offer different handles. The available handles are
listed in chapter 3.6 on page 11.
10.2.1 Mounting of the handles
The handles are supplied dismounted. They consist of the following parts:
Handle 1.2 m
(47.2“)
(33)
(34)
(36)
(37)
(38)
(40)
(35)