Proceq ZRP 6030+, Инструкция по эксплуатации

Страница: 46 / 52

Page 46
authorized Proceq agent for further
information.
16.4 Error message
– “Factory calibration has expired” ”
Press the warning triangle and afterwards the
advice “Factory calibration has expired” to
get a more detailed explanation.
The date of the last factory calibration
dates back more than 2 years. It should
be returned to the manufacturer for
checking, calibration and certification.
Contact Proceq or your authorized
Proceq-agent for details.
16.5 Reset of the ZRP 6030+
If the firmware of the ZRP 6030+ freezes you can reset the instrument by shutting it
of the instrument completely as described in chapter 5
“Setting up” on page 15.
17 Illustration of the measuring principle