Proceq ZRP 6030+, Инструкция по эксплуатации

Страница: 41 / 52

Page 41
Units
Path: ->
and selecting “Setup
“
Select
“Units” from the menu to choose the
preferred measurement units.
Options
Path: ->
and selecting “Setup”
Select
“Options”. Installed options can be
activated and deactivated for each user
profile. Only installed options are shown.
Reset settings to factory default
Path: ->
and selecting “Setup”
“Reset settings to factory default” will reset all
settings of the ZRP 6030+ to factory defaults.
This cannot be undone. If you are sure to
carry out the reset you need to confirm this
message.