Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. This Class B digital apparatus complies with
Industry Canada RSS standards. To comply with FCC and Industry Canada RF
radiation exposure limits for general population, the transmitter with its antenna
must be installed such that a minimum separation distance of 20 cm is
maintained between the radiator (antenna) and all persons at all times and must
not be collocated or operating in conjunction with any other antenna or
transmitter.
This document (incl. Quick Start Guide and Product Certificates) constitutes an integral
part of Proceq’s General Terms and Conditions of Sale and General Terms and
Conditions of Rental, together with any other guideline, precautions, policies and
conditions which Proceq has made and may make available to you at
www.proceq.com/downloads, as amended from time to time (the Documents). Proceq
reserves the right to change without notice any information, specifications and
recommendations contained in this document and in any of the associated Documents.
You shall observe and be solely responsible for the safe and lawful use of and your own
conduct while using this product, and any consequences thereof. The use and operation
of this product is at your own discretion and risk. Proceq hereby disclaims any and all
loss, liability or damages resulting from or out of your use of the product. Please ensure
you operate and use this product only for purposes that are proper and in accordance
with the instructions given herein together with all safety and health precautions,
applicable laws, rules, regulations, and as provided for in any of the Documents.
Notice
Products:
Proceq Part Numbers:
Manufacturer:
Zehntner Glossmeter ZG8150
420 00 505
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
We confirm that the Zehntner glossmeter is in conformity with
RoHS, WEEE and the following directives and standards:
Low voltage directive:
RoHS directive:
Safety requirements:
Ratio Equipment directive (EMC):
Determined by:
Photobiological safety:
FCC:
RoHS:
2014/35/EU
2011/65/EU
EN61010-1:2015/IEC61010-1:2010
2014/ 53/EU/
EN ETSI 300 328 V2.1.1
EN ETSI 301 489-1 V2.2.0
EN ETSI 301 489-17 V3.2.0
IEC 62479:2010/EN 62479:2011
EN61326-1:2013/
IEC61326-1:2012/
2006/25/
EN60825-1:2014
EC
IEC 62471:2006
CFR47 Part 15
EN50581:2012
Swiss Made Declaration
We confirm that the products named above were developed and manufactured in
Switzerland and fulfill the requirements needed for the declaration “Made in Switzerland”
or “Swiss Made”.
The requirements for industrial products are specified in detail in the National Swiss
Trademark Protection Statute (Art. 47-60, MSchG) covering goods and services.
Products:
Proceq Part Numbers:
Manufacturer:
Zehntner Glossmeter ZG8150
420 00 505
Proceq SA, Ringstrasse 2
8603 Schwerzenbach, Switzerland
Patrick Waller
Chief Operating Officer
Schwerzenbach, 13.12.2019
