Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 40 / 52

Page 40
The fields for cycle speed and stroke
length are marked red. After tapping on
the information symbol a message
will appear that either the cycle counts
or the cycle speed are too high.
Solution: The motor cannot reach the
preset number of double strokes with
the preset stroke length and speed.
Either the double stroke (cycle) speed
or the stroke length has to be reduced.
Alternatively, the acceleration mode or
speed mode of the motor can be
adjusted too. For this see chapter 8.5
“Motor settings” on page 38.
8.7.4 The motor is overheated
If the motor of the unit is overheated,
this message appears and the current
action will be interrupted. Confirm the
message with OK, the device switches
off. Let the device cool down before
switching it on again. Arrange for
enough ventilation around the device.
The unit must not be operated outside
of the allowed temperature range.