Proceq ZAA 2600.C, Инструкция по эксплуатации

Страница: 15 / 52

Page 15
5 Assembly and starting up
5.1 Assembly
Before the first use the apparatus has to be assembled or converted from another
application:
•
Check if the four rubber feet are mounted.
•
Place the glass plate (3) with the required side facing up in the unit.
•
Remove the start stop (1) and the end stop (2).
•
Loosen the fixing screws of the side panels (16) and remove the side panels
(15).
•
Mount the tool holder-side parts (5) and the tool holder bridge (4).
(5)
(3)
(4)