27. October 2020
© Copyright 2020, PROCEQ SA
7
4.3 RQ8000 Calibration Sample (optional)
With the RQ8000 Calibration Sample the operator can easily check that the RQ8000 unit has retained
its measurement level.
The calibration sample is a standard surface with a good glide attached inside a sturdy metal enclosure.
When performing a calibration sample measurement the movement speed should be closer to 1cm per
second. For optimal results the calibration sample is measured twice without lifting the unit from the
surface, please review the picture below.
This will allow the measurement to have more data for accurate border recognition. The displayed
calibration profile will be from the first sweep.
If you would like to purchase a calibration sample for your RQ8000 unit please contact Proceq for further
details.
