Proceq 2160.123G, Инструкция по эксплуатации

Страница: 4 / 12

page 4 last update: 24.06.2009
1. Safety precautions and warnings
1.1 Dangers
Caution !
You will find this caution symbol throughout this instruction manual, where you
may run the risk of minor or fatal injury caused by the inappropriate operation
of this instrument.
Please observe these regulations and use caution in these cases. Pass on all
safety precautions to other users. Besides the safety indications in this manual
the user must have consideration for general safety precautions.
Note
This symbol marks instructions you should take notice of in order to follow
directions, specifications and the correct working process as well as to avoid
damage or destruction of the instrument.
1.2 Notes regarding safety work
The cuttings of the NT-Cutter are sharpened and could cause injuries by
incorrect handling! Operators need to achieve an appropriate security
instruction.
The Proceq ZCT 2160 is solely for the determination of the adhesion of single
or multi-coat systems. Any other application is not in accordance with the
regulations. The manufacturer is not liable for damage resulting from
inappropriate application. The user bears the full responsibility.
Only spare parts and optional components provided by the manufacturer may
be used in combination with the Proceq ZCT 2160. If components other than
provided by PROCEQ are used with the Proceq ZCT 2160, there is no
guarantee by PROCEQ for resulting damages, defects or malfunctions.
Unauthorised modifications and changes of the Proceq ZCT 2160 are not
allowed. These will invalidate the guarantee. The manufacturer is not liable for
damages resulting from unauthorised modifications; the user bears the full
responsibility.