7
Operating Voltage
The Proceed amplifier is factory-set for 100V, 120V, 220V, or 240V AC mains opera-
tion at either 50 or 60 Hz, according to the country for which the unit was manu-
factured. (
230V in European Union countries, in compliance with CE regulations.
)
Make sure that the label on the rear panel of the amplifier indicates the correct
AC operating voltage for your location. The operating voltage cannot be changed
by the user, and any attempt to do so will void the warranty.
If the voltage indicated does not match the service in your area, see your Pro-
ceed dealer.
note the serial number
While you are checking the voltage, it would probably be a good idea to make a
record of the serial number for your amplifier. This can be found on the label
found on the bottom of the amplifier.
amplifier bottom-panel label
five channel amplifier
S/N
WARNING:
BEFORE ATTEMPTING TO OPERATE THIS
DEVICE, REFER TO OWNER'S MANUAL FOR PROPER
OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS.
HAZARDOUS VOLTAGE AVAILABLE INSIDE; DISCONNECT
AC ~ MAINS CABLE BEFORE OPENING UNIT.
No User Serviceable Components Inside.
For service, contact Madrigal Audio
Laboratories or an Authorized Dealer. Any modifications to this equipment will void all warranties.
Manufactured under license from Lucasfilm Ltd. Additionally licensed under the following
patents: U.S. number 5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. Lucasfilm
THX Audio, Lucasfilm, and Home THX Cinema are registered trademarks of Lucasfilm Ltd.
designed and manufactured in
USA
MADRIGAL AUDIO LABORATORIES, INC.
PR O C E E D
R
Содержание AMP 5
Страница 1: ...PR O C E E D Five Channel Amplifier ...
