Procare Apnea Monitor, Инструкция по эксплуатации

Страница: 6 / 12

Page 6 of 12
When the apnea monitor is turned off without pushing the RESET button first, the green power light will remain
on and the Sibling Alarm will sound. To silence the Sibling Alarm:

Press and hold the blue RESET button.

Press and release the gray POWER button.

Wait 2 seconds, and then release the RESET button.

To resume monitoring, press the gray POWER button.
Monitoring Your Baby’s Breathing
Respiration Light

The green respiration light will blink in rhythm
with each breath that the apnea monitor detects.
The light should blink only once for each breath,
although it may flash more times when the baby
is moving.
Apnea Light

When the apnea monitor detects a pause in
breathing longer than the limit set by the
physician the following will occur.

The red apnea light will come on and the alarm
will beep once every second. When the apnea
monitor detects breathing again, the beeping
alarm stops. The red light will stay on until you
press the
RESET button.
Monitoring Your Baby’s Heart Activity
Heart Rate Light

The green light marked with a heart blinks with
each heartbeat the apnea monitor detects.
High Heart Rate Light

When apnea monitor determines that the baby’s
heart rate is higher than the limit set by the
physician. The monitor will alert you by the
following:
o
The red light marked high heart rate will
come on and the alarm beeps twice each
second.
o
The beeping alarm stops when the condition
no longer exists.
o
The red light stays on until you press the blue
RESET button.