probst VM-301-KJ-GREENLINE, Руководство по эксплуатации

Страница: 51 / 79

4
For the use of this product, the following additional instructions must be observed:
▪
Only use the charger approved by Probst GmbH to charge the system
▪
Do not load the system above the currently permitted current values
▪
Do not disconnect or shut down the system under load
▪
Do not disconnect the power plug under load
▪
Only switch off the system when it is at standstill
▪
Do not switch off the system in a discharged state for long periods of time, but connect
it promptly to the appropriate, active charger (principle: "charging")
▪
Switch off the system if the signal tone is continuous
▪
Only use the system under the specified tightness classes
3
SCOPE OF SERVICES
The battery storage system includes the following components:
▪
lithium-ion modules
o
Number2 Modules
o
System interconnection 7s36p
▪
Number of temperature sensors 4
▪
Electrical heating functionYes
▪
Separating device Relay (mechanical isolator) EV200
▪
Fuse ANL Bolt-down 355 A
▪
Power interfaceSB175 Connector
▪
BMS (Battery Management System) & EMS (Energy Management System)
▪
Acoustic signaler
▪
Deep discharge protection
▪
4Gb microSD card for data logging
▪
Pressure compensation diaphragm & outgassing valve
▪
Communication cable with stand-alone termination and mating connector
▪
Digital enable signal
The system is complete on the part of Probst GmbH when delivered. The customer is
responsible for the final assembly and the correct installation of missing components as well as
the power and communication cabling in the vehicle.
In case of questions or ambiguities, please always contact Probst GmbH.