7
PROBRITE.COM
Please call 1-844-507-5651 or email [email protected] for further assistance.
6
Visit
www.probrite.com/install
for installation video tutorials and product support
Installation (continued)
3
Remove the
mounting base plate
D
C
NOTE:
The mounting plate tightening screws
(C) comes pre-installed on the light fixture.
☐
Loosen the two mounting base
tightening screws (C) using a philips
screwdriver to open the fixture. (Fig. 1)
☐
The fixture will side open and stay
connected on the hinge.( Fig. 2)
4
5
Knock out holes on
mounting base
Installing the mounting base
Installation (continued)
6
Making the electrical
connections
(fig 1)
(fig 1).
(fig 2).
(fig 1).
(fig 1).
(fig 2).
Junction Box
Junction Box
Surface Conduit Mount
☐
Route the junction box wires through
the large center hole in the mounting
base (D).
☐
Align the holes on the mounting
base (D) with the holes on your
junction box. Use two #8 screws (AA),
depending on the size of the holes in
your junction box, attach the mounting
base (D) to your junction box. (Fig. 1)
☐
Follow the wiring instructions given
below to make the electrical connec-
tions. (Fig. 1)
☐
Mark and drill two to four holes on the
wall surface as per the desired location
for fixing the mounting plate (D).
☐
Use two or more suitable screws
(provided by others) applicable to
the surface of mounting and fix the
mounting plate (D) on the surface.
(Fig. 2)
☐
For junction box mount: Measure the
size of your junction box and refer to
the guide in Fig. 1 to select the holes
to knock out.
☐
For 3
1/4
" junction box- Knock out
two holes in the inner ring.
☐
For 4" junction box- Knock out two
holes on the outer ring.
☐
For surface mount: Measure the
distance between two holes, pre-
drill holes into the mounting surface,
and knock holes on the desired ring
accordingly.
☐
Use a flat head hammer and screw
driver to knock out the two holes.
CAUTION:
DO NOT touch the LED and
Photocell lens (E) inside the fixture. DO NOT
damage or soil the reflector.
AA
D
D
BB
Junction Box
Screws (Provided by others)
