ProBreeze PB AC04 Скачать руководство пользователя страница 11

Controls

Power Button

Turn the appliance on and off.

Select between auto, cooling, dehumidifying, 
and fan-only modes.

Fan Speed Button

Select between high and low fan speeds. 
Note: Option not available in dehumidifying 

mode.

Mode Button

Auto Mode -

 The appliance automatically 

selects between cooling mode and fan only 
mode based off the room temperature. If 
the room temperature is greater than or 
equal to 24°C the appliance will activate 
cooling mode. If the room temperature is 
less than 24°C the appliance will activate 
fan-only mode.

Cooling Mode -

 Perfect for cooling a room 

in hot weather. Use the up and down 
buttons when in cooling mode to set the 
desired temperature between 15-31°C. The 
appliance will cool the room if the room 
temperature goes above the set 
temperature. If the room temperature goes 
below the set temperature the appliance 
will stop cooling the room and the fan will 
remain operating at the set fan speed. 
Note: The heat exhaust hose must be 
connected to allow the hot and humid air 
to be discharged outside.

Dehumidifying Mode -

 Ideal for reducing 

room humidity in humid and damp times of 
year. The appliance will dehumidify the room if 
the room temperature is greater than or equal 
to 15°C or less than or equal to 35°C and the 
fan operates at the low fan speed. If the room 
temperature decreases to less than 15°C or 
increases to more than 35°C the appliance will 
stop dehumidifying the room and the fan 
operates at the low fan speed.

Fan-Only Mode -

 The appliance operates at 

the set fan speed. Room temperature is 
displayed on the digital display panel. Note: 
The heat exhaust hose does not have to be 
connected to the appliance.

The temperature cannot be set in  
dehumidifying mode.
The fan speed cannot be set in dehumidifying 
mode and the appliance runs in low fan speed.
The heat exhaust hose must be connected to 
allow the hot and humid air to be discharged 
outside.

Note: Temperature can only be set when in 
cooling mode.

Sleep Mode Button

Set sleep mode to reduce energy consumption 
when in cooling mode. 

Fan speed with automatically reduce to low fan 
speed.

After one hour the set temperature will increase 
automatically by 1°C. After two hours the set 
temperature will increase automatically by a 
further 1°C. After six hours the appliance will turn 
off. 

English | 04

English | 10

-

-

-

Note:

Содержание PB AC04



















Отзывы: