1. On / Off Button
2. ‘On’ Green LED
3. ‘Full’ Yellow LED
4. Air Inlet
5. Removable Water Tank
6. Dry Air Outlet
7. Power Connector
8. Rubber Feet
9. Power Adaptor
10. Power Jack
11. Wall Plug
12. Water Displacement Hole
13. Water Tank
14. Hydraulic Cut-Off
SWITCHING ON
―
―
1. Remove the power adapter from the box
and attach it to both the dehumidifier
and main wall socket.
2. Switch the dehumidifier ON using the
ON/OFF switch. The green LED will
illuminate and you should feel a light
breeze blowing out of the dry air outlet.
3. To switch OFF, press the ON/OFF switch
again.
Note: Your dehumidifier will not work if the
ambient temperature is too low. Moisture
REMOVING THE WATER TANK
―
―
CLEANING & STORAGE
―
―
WARNING: ALWAYS TURN THE
APPLIANCE OFF AND UNPLUG THE
POWER CORD FROM THE ELECTRICAL
OUTLET BEFORE HANDLING OR
CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR
OTHER LIQUIDS TO RUN INTO THE
INTERIOR OF THE APPLIANCE, AS
THIS COULD CREATE A FIRE AND/OR
ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE
CLEANERS OR SOLVENTS, AS THIS
CAN DAMAGE THE APPLIANCE.
•
Do not attempt to clean the appliance in
any other way than that detailed by the
manufacturer.
•
Empty the water tank prior to transport
and storage.
•
Clean the exterior surface of the appliance
by wiping it with a soft, damp cloth. Dry
When the water tank is full, the LED light will
turn yellow and the dehumidifier will turn
off. To empty the water tank, make sure the
dehumidifier is off and gently pull out the water
tank. Remove the black plug from the top of
the tank. Pour the water out by tilting the tank
until it is completely empty. Firmly place the
black plug back into the hole. Carefully slot the
water tank back into the dehumidifier.
The water tank can hold a maximum of 17 fl oz
of water. Your dehumidifier can collect up to
8 fl oz of water per day in it’s ideal environment,
which is 86 °F and 80 % relative humidity.
the appliance with a soft, clean cloth.
•
Always empty the water tank and clean
and dry the appliance when not in use to
prevent mold.
•
Store in a clean, dry place away from
direct sunlight. Place out of reach of
children.
•
To store your product, we recommend
using the original or a similar sized box.
•
Ensure the appliance and water tank are
clean and dry before storage.
Cleaning the water tank:
•
Remove and empty the water tank as per
the instructions above.
•
Clean the water tank with warm tap water
and mild detergent (e.g. washing up
liquid).
•
Ensure you have removed any scale
build-up.
•
Wipe all surfaces dry before placing the
water tank back into the appliance.
•
Do not use boiling water to clean the
water tank.
SPECIFICATIONS
―
―
•
Operating Capacity: Approximately
8 fl oz per day at 86 °F and 80 % R.H
•
Cooling Element: Thermo-Electric Peltier
Module
•
Fan: 3.15 inches x 3.15 inches Brushless
Motor
•
Voltage: 9 V DC (via power adapter
supplied, GQ24-090250-AU), 2.5A
•
Power: 21 W
•
Water Tank Capacity: 17 fl oz (Max)
FCC STATEMENT
―
―
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may cause
undesired operation. Warning: Changes or
modifications not expressly approved by the
party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
can't be removed from the air if the
temperature falls below 40℉, and moisture
collection will be significantly reduced below
59℉.
RECYCLING & DISPOSAL
―
―
The packaging of your new product has a
recycle mark on it. Please dispose of it as
recycled paper. Waste electrical products
should not be disposed of with general
household waste. This is to prevent the
possible harm to the environment and human
well-being. Contact your local council or
government for information regarding the
collection schemes in your area.
3 | English
English | 4
