6
Section 1: Installing the Receiver and Transmitter Batteries
Receiver Batteries
m
1. Remove the two knurled aluminum
nuts that secure the cockpit as shown.
Pull the cockpit off the boat.
m
2. Carefully note how the exhaust
system is assembled.
m
3. Use a 2.5mm Allen wrench to remove
the tuned pipe mount as shown above.
m
4. Carefully remove the tuned pipe by sliding the
silicone coupler apart from the exhaust header.
m
5. Remove the clear lid that
covers the radio box.
m
6. Remove the dry cell battery holder from the
radio box and unwrap the foam around the
dry cell battery holder. Install 4 “AA” alkaline
batteries into it as shown. Note the proper
polarity. Wrap the battery box in foam.
Tuned Pipe Mount
Silicone Coupler
Tuned Pipe
