probiker JAKUTSK, Инструкция по эксплуатации

Страница: 13 / 67

1.2 | General performance features
The gloves were tested in accordance with the European standard
EN 13594:2015.
EN 13594:2015 specifies two performance classes in respect of the
protection provided. These two performance classes have been defined
in order to introduce certified protection for as many motorcycle riders
as possible. The degree of risk or danger to which a motorcycle rider is
exposed depends greatly on his/her riding style and the nature of any
accident.
“Performance class 1” is the minimum requirement that gloves must
meet in order to provide actual protection in the event of an accident.
“Performance class 1” gloves also have optimum ergonomics for all
riding styles. “Performance class 2” was introduced for cases where
motorcycle riders are at an increased accident risk on account of their
riding style. “Performance class 2” gloves give a higher degree of protec-
tion, but this can make them less ergonomic and therefore they are not
suitable for all motorcycle riders.
The following features are tested in accordance with EN 13594:2015
and are rated as follows:
Tests Level 1 Level 2
Cuff length ≥ + 15 mm ≥ + 50 mm
Restraint system ≥ 25N ≥ 50N
Tear strength
Palm and palm side of fingers ≥ 25N ≥ 35N
Back and back side of fingers ≥ 18N ≥ 30N
Fourchettes ≥ 18N ≥ 25N
Seam strength
Main seams ≥ 6N/mm ≥ 10N/mm
Fourchettes ≥ 4N/mm ≥ 7N/mm