ProArc TR-3504, Руководство пользователя

Страница: 25 / 27

17
APPENDIX A : INVERTER SETTINGS
02
：
Digital input / output Parameters.
Pr. No. Parameters Function Explanation
Setting
Value
02-00 Two-wire / three-wire operation control.
2
：
Two-wire mode 2, power on for
operation control.
(M1
：
RUN/ STOP,M2:REV/FWD)
2
02-03 Multi-function input command 3 (MI3)
6
：
Zero speed including stop (Frequency
command)
6
02-04 Multi-function input command 4 (MI4) 5
：
Zero speed (Frequency command) 5
02-13 ＊ Multi-function output 1 (RY1) 11
：
Malfunction indication 11
02-16 ＊ Multi-function output 2 (MO1) 1
：
Indication during RUN 1
05
：
Motor Parameters.
Pr. No. Parameters Function Explanation
Setting
Value
05-01 Motor parameter auto-truing Depending on the model power 1.9
05-03 ＊ Rated speed for induction motor 1 (rpm) Depending on the model power 1730
05-04 Number of poles for induction motor 1 Depending on the model number of poles 4
05-05 No-load current for induction motor 1(A) Depending on the model power 1.12
06
：
Protection Parameters (1)
Pr. No. Parameters Function Explanation
Setting
Value
06-06 ＊
Over-Torque detection selection
(motor 1) 3
：
Continue operation after over-torque
decoction during run)
3
06-07 ＊ Over-Torque detection level (motor 1)
0~250% (100% corresponds to the
current of the drive)
150
06-08 ＊ Over-Torque detection time (motor 1) 0.0~60.0 sec 1
06-13 ＊
Electronic thermal relay selection
(motor1)
0
：
Inverter motor (with extremal forced
Colling)
1
：
Standard motor (motor with fan on
the shaft)
0
06-14
＊
Electronic thermal relay action time
motor1)
30.0~060.0sec 60
07
：
Special Parameters.
Pr. No. Parameters Function Explanation
Setting
Value
07-19 ＊ Fan cooling control Fan is always ON 0
Motor specifications
︰
1/2HP, 3PH 220/380V 60Hz 1.9/1.10A 1730RPM 4P
Line speed
：
60~1200mm, Roller diameter
：ψ
200
（
628.4mm
）
1.90rpm/min