2
Camera Jib Setup
Insert central fork of Jib arm into 100mm bowl of tripod stand, then attach bottom clamp to it for
secure connection.
NOTE: It is important to make sure that the Central Fork is seated in the bowl properly. That means
perpendicular to the tripod bowl. Off axis installation may hamper movement of the jib. Also you may need
the assistance of a grip stand to hold the camera end of the arm during installation preventing it from
falling as it will be front heavy at this point. You may also need the grip stand or assistance at the rear of
the jib when mounting the camera.
NOTE: Tripod Stand is Not Included.
Unscrew the knob to extend jib arm at back and retighten the knob. Secure all the connections.
Insert weight rod into the jib arm. Now slide in weight to it as per your requirement and screw in
weight closer properly.
(Counter weight Not Included)