PROAIM VI-SPCM-01, Инструкция по сборке

Страница: 3 / 5

3
•
To secure the Camera (Not Included) with the
Gimbal (Not Included) , lock it properly with
the lock lever of the gimbal, as shown in the
image.
•
Push the button of the gimbal (Not Included)
and place it on the DJI - QR Quick Release plate
(Not Included) by sliding it on the plate.
•
Then tighten it with the knob of the DJI - QR
Quick Release plate (Not Included) .
•
Then properly tighten the male Mitchell ring
with the help of Mitchell Key
.
•
Remove the bolts of the Spring - cam Mitchell
vibration Isolator with the help of the Allen
key, as shown in the image.
NOTE: It has 8 high - strength springs that absorb
inertial movements and supports a 5 - 50 kg /
11 - 110lb heavy payload. Also, you can use the
springs in different configurations to precisely
achieve the lift needed.
•
Mount the Spring - cam Mitchell vibration
Isolator on the mounting part of the Hi - Hat
and attach it with the male Mitchell ring.
Hi - Hat (Not - Included) Setup
Slider (Not - Included) Setup
Push Button