2
Remove the Dolly from the storage bag.
Loosen the lock knob from the 27” central
section.
Now, arrange the 32” rods of Dolly to give it
a triangular shape. Then attach the 27” rod
to the wheel set and tighten the knob to
secure.
Attach the 14” rod to the base and tighten the
screws to secure it. Now, attach 15” camera
mounting post as shown in the picture and
your Dolly is ready to use.
Using the sections with the attached nylon
bushings remove the outboard set of screws,
slide an extension section on to each end to
complete a 12’ run and install and tighten
the screws to secure.
Swift Dolly
Setup
Now, track is ready and place the dolly on
the tracks as shown in the picture.
Attach the Track Spacers and Track Supports
to the track for it’s rigidity and to prevent
your Dolly from running off the rails.
Track
Setup