2
Remove the lock knob from the 27" central
section and connect the 32" dolly rods to give
it a triangular shape. Attach the 27" rod to the
wheel set and tighten the knob to secure.
Loosen the lock knob from the 32" rods of the
dolly section, connect with 27" of central area,
and tighten the knob to secure.
Attach the 14" central support system rod to
the base and tighten the screws to secure it.
Place the dolly on the tracks as shown in the
image.
Swift Dolly
Setup
Attach a 15" camera mounting post to the
base and tighten the screws as shown in the
images.
E to E
C to C