3
Loosen all allen bolts with help of provided
allen key as shown in images.
Remove the Passive Plate from the Frame as
shown in the image.
Now reduce the rings set in center of the
Vibration Isolator as per your payload
requirement. Then similarly follow the back
steps to assemble the Vibration Isolator.
Turn the Isolator upside-down & loosen
the bolts to remove Square-O-Rings from
the Isolator.
There are many different holes at the top
and bottom side of vibration isolator plate to
mount different accessories.
1/4”-20 hole is for DJI-QR Ronin Plate
M4 or M3 hole is for MOVI Mount
Be sure to mount your Gimbal Camera Setup
securely.
