2
Camera Jib Setup
Insert central fork of Jib arm into bowl of tripod stand, then attach bottom clamp to it for secure
connection.
NOTE: It is important to make sure that the Central Fork is seated in the bowl properly. That means
perpendicular to the tripod bowl. Off axis installation may hamper movement of the jib. Also you may need
the assistance of a grip stand to hold the camera end of the arm during installation preventing it from
falling as it will be front heavy at this point. You may also need the grip stand or assistance at the rear of
the jib when mounting the camera.
Now to extend the rear section of jib, loosen the Allen bolts with provided Allen key and then, loosen
the knob as shown in the picture.
Provided are the jib panning control knobs (as
shown in the picture). Loosen the knobs for smooth
pan movement of jib and tighten these knobs to
lock pan movement of jib.
Then, loosen the knob provided at lower telescopic
section of jib arm as shown in the picture to extend
front section of telescopic jib accordingly to the rear
section.
