2
Attach Utility Tray with C-Stand
Attach the tray to any 1/4″-20 thread, 3/8”
tripod thread, or C-stand mount. If using
C-Stand mount, tighten the knob onto the
C-stand to create stable platform.
Loosen the knob of universal clamp & mount
on any rod from 0.5” to 2.1” in diameter.
NOTE:
Clamp is rotatable, it can rotate 360 °
and can fix at any position by tightening the
knob. Do not over tighten the knob.
Push the pin & insert the Side arm into the
clamp, match the inserting holes to secure it
properly.
Loosen the knob and insert the baby pin
Adapter into the baby pin hole as shown in
the image.
Utility Tray with Arm & Clamp
Setup
Now your table is ready to connect in baby pin
via the 1/4-20 mount, secure it properly by
tightening the knob.
