8
Adjusting The Wire Tensioner
To add strength and stability to your
Jib and allow for maximum weight
carrying, the fore and aft wire ends
once positioned need to have the
slack taken out by use of the wire
adjuster
shown
above.
Once
connected in line with the wire,
simply rotate the mid section handle
to tighten the wire adding the
required amount of strength to the
system.
Screw-In System
Wire Adjustment
Adding The Counter Weights
Securing the counter weights to the Jib is accomplished by the use of the stainless steel
shank. It has two lock offs, one for each side of the Arm to prevent the weights from
shifting during use or accidentally falling off the jib.
Standard exercise weights (not supplied) with a 1’ hole are easily rig mountable and are
used to equal the weight placed on the camera side of the Jib.
Once you discover correct balance,
consider marking the weights for that
particular camera facilitating an easier
set up the next time.
Weights shown in the image are for
demonstration
Camera Mounting Plate
To accommodate various manufacturers and different sized cameras, multiple slots are
provided for attachment.