5
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO
THE GEAR!
BE HIGHLY VIGILANT WHILE PLACING
Gear Head must be carefully locked while setting-up on any equipment.
DO NOT FORGET TO SECURE THE CAMERA
While mounting camera on Gear Head, lock Tilt Axis and keep Pan Axis on neutral
position.
NEVER LEAVE THE KNOBS LOOSE
Always tighten the locking knobs properly for giving security to camera setup.
CAREFUL WHILE TRANSFERING
While you wish to transport the head, don’t forget to remove Hand Cranks/Wheels.
Loosen all locks and set both Pan and Tilt levers in Low or Neutral speed.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS
AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE
Assembling
Screw-in the Stud into 100mm Bowl base attached to Orion Geared Head and tighten it
properly. Then, mount Gear Head onto any compatible Tripod stand and lock accurately
with Tightening Knob.