2
If, You Detach the legs
Loosen the knobs & Remove the 6”scaffold
leg into the Mitchell mount plate.
Similarly loosen the knobs of clamp &
Remove it from their location as shown in the
image
Loosen the knobs and spread it on the floor.
Then tighten the knobs of Mitchell triohat
again to secure appropriately.
Mitchell Cyrus Hi-Hat
Setup
NOTE:
Be sure all knobs are tight before and after any adjustments.
Loosen the knobs & Remove the 6” Scaffold
legs.
NOTE:
You can Adjust the legs & Arms also by
loosening the provided knob.
