PROAIM KITE-22-WONDER, Руководство по установке и эксплуатации

Страница: 5 / 15

PROAIM KITE-22 WONDER PACKAGE 5
Warning: We have provided double locking precautions on Jib Stand; Pin is the first and pri-
mary locking, knob is the secondary locking, so first lock the Pin to avoid slipping of stand.

In case of Spreader : Fix the tripod stand with Spreader and tighten the top ratchet knobs
of stand to secure it in place.

In case of Dolly : Insert the tripod legs into the foots on the dolly.
Dolly Foots

Install the Hub Assembly by sliding the bottom of the hub assembly
into the stand’s Mount opening.
Warning: This is the Pan Friction Knob. Never pan the Jib with this knob
tightened.
If this knob turns while panning, it is too tight. Only tighten while parking
the jib !
INSTALLING THE HUB ASSEMBLY
Note : The Hub Assembly has several mounting holes. You can mount LCD
Monitor or Joystick box to this assembly if you want.
INSTALLING THE JIB SECTIONS

Install the Section 7 & 6 (largest diameter section to the rear) to the vertical pivot point with the
long bolt, washers and nut. Tighten the nut properly to secure the section.