2
Loosen the bottom clamp of the fluid head
(Not Included)
and mount it on the stand.
Fly Master Jib Setup
Then properly tighten the bottom clamp on
the 100mm bowl stand
(Not Included)
,
as
shown in the image.
NOTE: It comes with a tripod mount with 1/4"
-20 and 3/8"-16 threads on the bottom to mount
it on the fluid head.
Now remove the fluid head plate by pressing
the lock lever.
Attach the plate to the Fly-master Jib and
securely tighten it, matching the threads, with
the help of a screwdriver.
NOTE: It extended when not in use at
congested shoot sites. Just slide in or out when
required.
Now mount the Fly-master Jib on top of the
fluid head and properly tighten it with the
locking lever.