3
•
Insert the 12
-
volt AC adapter (4 pin XLR) to
the controller box.
NOTE:
If the Joystick Control is opposite, undo
the connectors of motors, rotate 180° and
re
-
install.
•
Switch the controller box ON, as shown in the
image.
•
Increase or decrease the Pan speed according
to your requirement and set the damping.
•
Connect the female end of the cable to the
controller box.
NOTE:
Any 12 volt battery may operate this Pan
Tilt Head as long as the Connector and the #1
Negative pin & #4 Positive pin of Cable meet
together.
•
Attach the second end of the power cable to
the universal adapter.
•
Attach the power cable with the AC adapter.
