PROAIM CINEMA VCTR-TH Скачать руководство пользователя страница 3

Страница: 3 / 4

•

Insert and tighten the knob to secure the

tripod holder properly.

•

Slide and mount the tripod holder on the

tripod holder bar.

•

Repeat the process for the other tripod

holder.

•

Loosen the ratchet knob and open the clamp
on the tripod holder bar.

•

Tighten the ratchet knob of the top accessory
crossbar clamp as shown in the image.

•

Mount the tripod holder bar on the 38mm
mast and tighten the ratchet knob.

•

Remove the knob of the tripod holder.

Tripod Holder Mounting

Содержание CINEMA VCTR-TH

Страница 1: ...electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher 1 x 38mm ID Clamp 1 x Pair Tripod H...

Страница 2: ...lamp Tripod Holder Setup Image showing clamp attached to the crossbar Insert the 38mm OD mast into the clamp hole on the bottom crossbar Rod Mounting Loosen the side clamp knobs of the accessory cross...

Страница 3: ...eat the process for the other tripod holder Loosen the ratchet knob and open the clamp on the tripod holder bar Tighten the ratchet knob of the top accessory crossbar clamp as shown in the image Mount...

Страница 4: ...tion by us Liability We are not liable for damage caused by products that we do not supply or from mishandling in transit accident misuse neglect lack of care of the product or service by anyone other...