PROAIM Airwave Vibration Isolator Arm, Инструкция по сборке

Страница: 2 / 4

2

Loosen Pole Clamps via knobs. Insert a pole
into clamps and tighten them properly.

Attach Isolator onto the nose bracket of
Airwave Arm with help of bolts. Then tighten
these bolts with allen key.
Airwave Arm Setup
NOTE: Nose Bracket can be adjusted on two
levels, top and bottom, as shown in image.
NOTE: Nose Plate can also be mounted in the
opposite direction.

Loosen springs to decrease the weighing
capacity & tighten them to increase the
weighing capacity.
Spring Adjustment
NOTE: Load Capacity can be easily adjusted by adjusting springs. Adjust both springs equally.