Operating instructions NJ1 & FREAK Compact bike
27
Figure 56: Lifting the drive wheel
Figure 57: Insertion maul of the drive unit slips
under the insertion shaft on the chassis
Figure 58: Insertion maul of the drive unit hung into
the insertion shaft on the chassis, eccentric pin not
inserted yet
Finally, the chassis is raised at the front or the
drive unit is raised on the pedal bearing
housing that the adapter plates of the drive unit
and chassis can completely rest on top of one-
another. In doing so, make sure that the
insertion maul and the insertion shaft stay in
position.
Figure 59: Adapter plates of the drive unit and
chassis resting on top on one-another
Now the eccentric pin must be inserted on the
left side in the direction of travel, and the lever
of the eccentric pin must be turned upwards
approx. 90° counter-clockwise. Finally, the
securing cord is hung onto the lever of the
eccentric pin.
Eccentric pin
Lift the
drive wheel
Securing
cord
Raise the pedal
bearing housing
Lift the chassis at
the front
Adapter plates resting
completely on top on
one-another
