NJ1 el. & FREAK el. compact bike usage instructions
34
with your vehicle dealer about safely securing
it using the existing fitted lashing rings or other
securing devices. Suitable brackets are mostly
available in the vehicle and are described in
the operating manual of the vehicle.
When the product is in the transport vehicle,
you or the person accompanying you should
proceed as follows:
1. Operate the parking brake.
2. Secure and safely stow any components
from the product which have been previ-
ously removed.
3. Objects that are installed to the product,
but do not belong to the product, must be
removed and securely stowed.
4. Secure the product with lashing straps. To
do this, use the existing securing devices
in the vehicle.
After securing, the product may not roll,
slip or tip over to the side any more.
The lashing straps used to secure the
product in the transport vehicle may only be
fitted to the components of the vehicle provid-
ed for that purpose, as well as to the frame and
bottom bracket support of the product.
Do not transport the product on the front
passenger seat. The product could slip and
impede the driver.
When loading and securing, make sure
that the cables and lines do not get tangled,
become kinked or otherwise damaged. The
product may not be used with damaged cables
and/or lines.
25.4 Transport in aircrafts
The lithium rechargeable batteries used are
classified as hazardous goods for transport by
air. It is not permitted to claim that there is a
right to transport them by air. The decision
about the transport is the sole responsibility of
the airline and this should be discussed in
advance of the flight or the booking.
26 Malfunctions
In the event of malfunctions that cannot be
repaired by yourself based on the usage in-
structions included in the scope of delivery,
please contact your rehabilitation specialist
dealer or PRO ACTIV directly.
Malfunctions must be repaired before any
further use or, if they occur during the trip, it
must be interrupted immediately.
All serious incidents that have occurred in con-
nection with the product must be reported to
the manufacturer and the responsible authority
in the state in which the user resides.
27 Cleaning and care
Regular cleaning of the product is prescribed
to prevent the components becoming
clogged
up due to dirt. In particular, the product should
be carefully cleaned after every major use, e.g.
summer or winter holidays.
To avoid corrosion and therefore malfunctions
or breakages of components, the product may
not be exposed to any aggressive environmen-
tal influences. If this cannot be avoided, the
product should be cleaned immediately after
such use and moving parts need to be
greased. Regular cleaning prevents corrosion
and increased wear.
In case the product becomes wet when using,
please dry it after use.
Clean the quick release axles of the run-
ning wheels as well as the ball bearings and
grease these with a little lubricating oil with
high corrosion protection properties (e.g. Ne-
oval MTO 300) approx. every 8 weeks in order
to guarantee the reliable functioning.
Clean your product with water, solvent or
neutral cleaning agents. Do not use any abra-
sive cleaning agents or aggressive, acidic
cleaners when cleaning. Only use water and
soap to clean the seat and backrest uphol-
stery.
