ATTACHING CGO4 GIMBAL CAMERA TO MULTICOPTER
NOTICE: Remove the fixed foam pad from the CG04 gimbal
camera before proceeding.
STEP 1
：
Insert the gimbal connection cord to the inner side of
gimbal damping plate (relative to the direction of H920 power
connection port).
ATTACHING CGO4 GIMBAL CAMERA TO PROACTION™
STEP 1
：
Securely attach CGO4 gimbal camera to ProAction™ with gimbal thumb screws,
then withdraw the gimbal cord from the left side.
STEP 2
：
Insert the gimbal cord into the center carrying handle socket.
STEP 3
：
Install the ProAction™ battery and engage the connector properly.
STEP 4
：
Erect the phone holder and install the mobile phone into it, and then you can
make Wi-Fi connection between CG04 gimbal camera and mobile device.
NOTICE: Remove the fixed foam pad from the CG04 gimbal camera before proceeding.
STEP 2
：
Mount the gimbal thumb screws and lock washers (4
pcs) to the gimbal and rotate the screws until they’re secured
into the gimbal damping plate.
NOTICE:
The front of the gimbal should be installed in the
direction of the nose of H920.
NOTICE: Use the dedicated lock washers when rotating the
screws.
STEP 3
：
Connect the gimbal power cord to H920 power
connection port.
Damping Carbon Plate
Damping Plate
Dowels
Rubber Dampers
Содержание CG04
Страница 1: ...V12242015...
