CONNECTING AND OPERATING
How to Connect the HDMIIPLR HDMI Over CAT6 Extender
One Source to Many Displays Function
2.
Connect one HDMI Cable between the HDMI output port of source
device and the HDMI input port of Transmitter unit
3.
Connect one 100Ohm CAT6 cable between the RJ45 port of transmitter
and input port of Gigabit Ethernet switch hub.
4.
Connect one 100Ohm CAT6 cable between the output port of each
Gigabit Ethernet switch hub and RJ45 port of Receiver unit.
5.
Connect 5V DC power supplies to both Transmitter and Receiver unit.
6.
Power on the output device first and then the source device.
7.
Use remote control to select the related channel dip switch has set up
on the transmitter side for each receiver. Please refer to Appendix A for
the link diagram.
Note:
1.
IR Function is able to receive signal from remote control of your
DVD player and remote control given along with our Receiver unit.
2.
As our Transmitter unit can support over 200 IP address for
different receiver unit, it can connect up to 200 pcs Receiver units.
3.
Please note that the Ethernet switch hub should be Gigabit Ethernet
switch hub.
Please refer to following diagram:
Содержание HDMIIPLR
Страница 1: ...www pro2 com au HDMI Over CAT6 with IR HDMIIPLR User Manual Transmitter Receiver...
Страница 14: ......