PROGRAMMING THE THERMOSTAT
4
Set Time
Follow the steps below to set the current time:
Press
MENU
Press
SET TIME
Day of the week will be flashing.
Use the or key to select the current day of the week.
Press
NEXT STEP
The current hour is flashing.
Use the or key to select the current hour.
When using 12-hour time, make sure the correct a.m. or p.m. choice is selected.
Press
NEXT STEP
Minutes are now flashing.
Use the or key to select current minutes.
Press
DONE
when completed
1.
2.
3.
4.
5.
6.
7.
8.
Keypad Lockout Note:
If appears in display then
the keypad is locked. All or
some of the keys will not
work. Hold the and
keys for 3 seconds to
remove the lock.
Important:
You will see a
TECHNICIAN
SETUP
option after the
MENU
key is pressed.
This
TECHNICIAN SETUP
key
is for installer configuration and
should
NOT
be changed unless
you consult your Professional
Heating and Air Conditioning
Technician.
The programmable fan feature will run the
fan continuously during any time period it
is programmed to be on. This is the best
way to keep the air circulated and to
eliminate hot & cold spots in your building.
Programmable fan is available for Zone 1,
the Local (Master) zone.
A Note About Programmable Fan:
