2
Getting to know the W150W Module
1
2
LCD
Red Indicator Light
1
3
2
COMMUNICATION QUICK REFERENCE
When the W150W receives
a wireless signal to repeat, the
Recieved
Symbol
will flash.
After a few seconds the Red
Indicator Light
and the
Transmit Symbol
will flash.
Indicating a repeated signal.
3
Module Button
Transmit symbol indicates
repeating signal.
Antenna symbol
indicates received
signal.
REFERENCE NUMBER
indicates
the current repeater mode.
1. When powered, the set Device Reference Number appears on the LCD. To Determine the Device
Reference Number needed, see the chart below.
2. To enter
Reference Number
selection mode, press the
Module Button
. The Reference
Number will start flashing. While flashing, press Module Button again to select Reference Number
needed. Once desired number is selected--stop. The number will quit flashing in 5 seconds and the
Device Reference Number is set.
3
----
Reference
Number
1
2
3
4
4
4
Device the Signal
is coming from
TO
Device the Signal
is traveling to
----
Not used at this time
Indoor or Outdoor Remotes
(R251W, RZ251W, R250W, RZ250W)
TO
TO
TO
TO
TO
TO
Thermostat (T955WH)
Thermostat (Z955W)
Thermostat (Z955W)
Thermostat (T631W-2)
Wireless Thermostat
(T955WH, Z955W)
Equipment Base Module
Equipment Base Module
Damper Module (Z260W)
Equipment Base Module
3
1
